Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: Sequoia Doc ID: RM000003GQ6000X
Title: LIGHTING (EXT): REAR LIGHT ASSEMBLY: REMOVAL (2008 Sequoia)

REMOVAL

HINT:

  • Use the same procedure for both the RH and LH sides.
  • The procedure described below is for the LH side.

1. REMOVE BACK DOOR CENTER GARNISH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

2. REMOVE BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

3. REMOVE BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

4. REMOVE BACK DOOR STRAP COVER DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

5. REMOVE BACK DOOR PULL STRAP DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

7. REMOVE BACK DOOR SERVICE HOLE COVER DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

8. REMOVE REAR LIGHT ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 2 nuts.

(c) Disengage the clip and remove the rear light.